Table of Contents
Advertisement
5
#8 x / "
8
Phillips pan head
screw
storage
cabinet
door
perforated
steel panel
Detail
N
- (underside view)
grommet
cutout
storage
cabinet
Figure 11
storage
cabinet
shelf pin
Figure 13
adjustable
shelf
shelf
pin
Detail O - (underside view)
Figure 12
(with mounting holes)
shelf pins
cabinet
door
Figure 14
Storage Cabinet Assembly
Overview
Note: Lecterns with a storage
cabinet always come requiring
installation of a grommet, perforated
steel panel, and adjustable-height
shelf. Optional components include
lock, storage bag hook, and Mini-Tap
power module, per storage cabinet
assembly. Your configuration may
vary.
storage
cabinet
cabinet
door
cabinet door
storage
cabinet
cabinet
door
Tributaire™ Collection - Lecterns
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Grommet Installation
1. Position the grommet above the
cabinet cutout with the lid opening
towards the user side (Figure 11).
2. Push the grommet into the storage
cabinet cutout as illustrated,
tapping lightly with a rubber mallet
if required. Use caution to avoid
scratching the grommet (Figure 11).
Perforated Steel Panel Installation
1. Open the doors of the storage cabinet
and identify the left-hand door which
has five mounting holes. Align the
mounting holes on the perforated
steel panel with the mounting holes
on the door and secure using five
#8 x
/
" Phillips pan head screws
5
8
(Figure 12 & Detail N).
Adjustable Shelf Installation
1. Open the doors on the storage
cabinet and determine the desired
height of the adjustable shelf
(Figure 13).
#8 x / "
5
8
Phillips pan head
Note: When inserting the shelf pins
screw
into the mounting holes inside the
storage cabinet, only insert two pins
at the back and one in the front. The
forth pin will be installed once the
shelf is in the designated location.
perforated
2. Insert three shelf pins, in the
steel panel
mounting hole locations inside the
storage cabinet, at the desired height
(Figure 13).
3. Tilt the adjustable shelf diagonally,
with the tilted-up side of the shelf at
the side of the cabinet with the two
shelf pins. Insert the shelf into the
cabinet, then rotate the shelf down
onto the three pins (Figure 14).
4. Lift the adjustable shelf up slightly
to gain access to the remaining front
shelf mounting hole, then insert the
remaining shelf pin at the correct
height (Detail O).
adjustable
shelf
11
Advertisement
Table of Contents
