CHAPTE R 6
First Time Deployment Options
In This Section:
Zero Touch Cloud Service
Deploying from a USB Drive or SD Card
There are different options for first time deployment of your Small and Medium Business (SMB)
gateways:
•
First Time Configuration Wizard - For more information, see the
appliance model.
•
Zero Touch Cloud Service
•
USB Drive
•
SD Card (1200R and 1400 appliances)
Zero Touch Cloud Service
The Zero Touch Cloud Service lets you easily manage the initial deployment of your gateways in
the Zero Touch portal https://zerotouch.checkpoint.com/ZeroTouch/login.jsp.
Zero Touch enables a gateway to automatically fetch settings from the cloud when it is connected
to the internet for the first time.
Note - If you already used the First Time Configuration Wizard to configure your appliance, you
cannot use the Zero Touch Cloud Service. If you start the First Time Configuration Wizard while
the Zero Touch settings are being installed, the installation process terminates.
After the gateway downloads and successfully applies the settings, it does not connect to the Zero
Touch server again.
For more information on how to use Zero Touch, see sk116375
http://supportcontent.checkpoint.com/solutions?id=sk116375
User Guide
.
Check Point 1100/1200R/1400 Appliances Centrally Managed Administration Guide R77.20.75
............................................................................................
.....................................................................
Getting Started Guide
Check Point Zero Touch
and the
38
39
for your
|
38