Managing Licenses - Infinity Check Point L-71WD Administration Manual

To connect to the Security Management Server later, select Connect to the Security
•
Management Server later.
4. Click Finish.
To reinitialize trusted communication with the Security Management Server:
1. In the Security Management Server section, click Advanced to reinitialize trusted
communication.
2. Click Reinitialize Trusted Communication.
A Warning message shows.
3. Click Yes.
Note - You need to coordinate this operation with the Security Management Server
administrator, as reinitialization is necessary on both sides.
Security Policy
To obtain the security policy from the Security Management Server, click Fetch Policy. This option
is available only if trust is established with the Security Management Server.
Internet
To test connectivity, click Test Connection Status. A status message shows the results of the test.
You can click Settings to configure Internet connections.

Managing Licenses

The Home > License page shows the license state for the software blades. From this page, the
appliance can connect to the Check Point User Center with its credentials to pull the license
information and activate the appliance.
In most cases, you must first register the appliance in your Check Point User Center account or
create one if you don't already have one. A User Center account is necessary to receive support
and updates.
If you have Internet connectivity configured:
1. Click the Activate License link on this page to be directed to the registration form in the User
Center.
2. If registration information is not successfully retrieved, browse to the applicable URL:
•
For 1100 Appliances:
•
For 1200R and 1400 Appliances:
3. Complete the applicable fields in the User Center registration.
• Appliance MAC address
• Appliance registration key
• Select Hardware Platform
Select Hardware Model
•
4. Return to this page and click Activate License.
You are notified that you successfully activated the appliance. After initial activation, the
Activate License button shows Reactivate. If changes are made to your license, click
Reactivate to get the updated license information.
Check Point 1100/1200R/1400 Appliances Centrally Managed Administration Guide R77.20.75
https://register.checkpoint.com
https://smbregistration.checkpoint.com
Appliance Configuration
| 47