Managing Installed Certificates - Infinity Check Point L-71WD Administration Manual

Managing Installed Certificates

On the Installed Certificates page, you can create and manage appliance certificates or upload a
P12 certificate. Uploaded certificates and the default certificates are displayed in a table. To see
certificate details, click the certificate name.
On the Device > Device Details page, you can select and assign a Web portal certificate from the
list of installed certificates.
Installed certificates are used in the Web portal.
These are the steps to create a signed certificate:
1. Create a signing request.
2. Export the signed request (download the signing request from the appliance).
3. Send the signing request to the CA.
4. When you receive the signed certificate from the CA, upload it to the appliance.
To create a new certificate to be signed by a CA:
1. Click New Signing Request. The New Certificate Request window opens.
2. Enter a Certificate name.
3. In the Subject DN enter a distinguished name (e.g. CN=myGateway).
4. Optional - to add alternate names for the certificate, click New. Select the Type and enter the
Alternate name and click Apply.
5. Click Generate.
The new signing request is added to the table and the status shows "Waiting for signed
certificate". Note - You cannot edit the request after it is created.
To export the signing request:
Click Export.
To upload the signed certificate when you receive the signed certificate from the CA:
1. Select the signing request entry from the table.
2. Click Upload Signed Certificate.
3. Browse to the signed certificate file (*.crt).
4. Click Complete.
The status of the installed certificate record changes from "Waiting for signed certificate" to
"Verified".
To upload a P12 file:
1. Click Upload P12 Certificate.
2. Browse to the file.
3. Edit the Certificate name if necessary.
4. Enter the certificate password.
5. Click Apply.
Check Point 1100/1200R/1400 Appliances Centrally Managed Administration Guide R77.20.75
Appliance Configuration
| 91