Table of Contents
Advertisement
To edit a user or group:
1. Select the user or group from the list.
2. Click Edit.
3. Make the relevant changes and click Apply.
To delete a user or group:
1. Select the user or group from the list.
2. Click Delete.
3. Click OK in the confirmation message.
The user or group is deleted.
Configuring Local and Remote System Administrators
The Device > Administrators page lists the Check Point Appliance administrators and lets you:
•
Create new local administrators
•
Configure the session timeout
•
Limit login failure attempts
Administrators can also be defined in a remote RADIUS server and you can configure the
appliance to allow them access. Authentication of those remotely defined administrators is done
by the same RADIUS server.
Administrator Roles:
•
Super Administrator - All permissions. Super Administrators can create new locally defined
administrators and change permissions for others.
•
Read Only Administrator - Limited permissions. Read Only Administrators cannot update
appliance configuration but can change their own passwords or run a traffic monitoring report
from the Tools page.
•
Networking Administrator - Limited permissions. Networking Administrators can update or
modify operating system settings. They can select a service or network object but cannot
create or modify it.
Two administrators with write permissions cannot log in at the same time. If an administrator is
already logged in, a message shows. You can choose to log in with Read-Only permission or to
continue. If you continue the login process, the first administrator session ends automatically.
The correct Administrator Role must be configured to perform the operations listed below. If not,
a Permission Error message shows.
Check Point 1100/1200R/1400 Appliances Centrally Managed Administration Guide R77.20.75
Appliance Configuration
|
95
Advertisement
Table of Contents
