Table of Contents
Advertisement
Note - Only the last generated report for each report type is saved in the appliance. When you
generate a new report, you override the last saved report for the specified type.
To generate a report:
Click the applicable time frame link at the top of the page (Monthly, Weekly, Daily or Hourly).
The line below the links shows the selected report and its time frame. To refresh the data shown,
click Generate.
The report includes these sections:
•
Executive Summary
•
Table of Contents
•
Report Pages
Executive Summary
The first page of the report is the executive summary and shows:
•
The number of Anti-Bot and Anti-Virus malware detected by the Security Gateway and the
number of IPS attacks.
•
Top bandwidth consuming statistics by category, site, and user. You can click the Top category,
Top site, or Top user link to get to the applicable report page. It also shows Bandwidth Usage
by Applications statistics for the top 5 applications in a doughnut chart and total traffic
received and sent.
•
The number of infected hosts, servers, and recently active infected hosts.
•
The number of high risk applications, the most used high risk applications, and the top users
of high risk applications.
•
The Security Gateway name, version, and MAC address.
Table of Contents
The table of contents contains links to the network analysis, security analysis, and infected hosts
reports. Click a link to go directly to the selected section.
Report Pages
Each report page shows a detailed graph, table, and descriptions.
Note - This page is available from the Home and Logs & Monitoring tabs.
Using System Tools
On the Tools page you can:
•
Monitor system resources.
•
Show the routing table.
•
Verify the appliance connectivity to Cloud Services.
•
Display DSL Statistics (DSL models only)
•
Generate a CPInfo file.
•
Ping or trace an IP address.
•
Perform a DNS lookup.
Check Point 1100/1200R/1400 Appliances Centrally Managed Administration Guide R77.20.75
Appliance Configuration
|
52
Advertisement
Table of Contents
