Related Manuals for AVA WEIGH 334BS150TX
Summary of Contents for AVA WEIGH 334BS150TX
- Page 1 05/2020 USER MANUAL Digital Receiving Bench Scales w/ Tower Displays Legal for Trade 334BS150TX 334BS300TX 150 lb. 300 lb.
-
Page 2: Table Of Contents
TABLE OF CONTENTS General & Safety Information .................1 Specifications......................2 Unpacking & Setup ....................3 • Packing List ..................................3 • Unpacking & Assembly ..............................3 Display & Keypad ....................... 4 • Display Characters .................................4 • Indicator Display ................................5 • Function Keys ..................................6 Operation &... -
Page 3: Specifications
SPECIFICATIONS 334BS150TX 334BS300TX MAX CAPACITY 150 lb. / 60kg 300 lb. / 150kg READABILITY 0.05 lb. / 0.02kg 0.1 lb. / 0.05kg MIN WEIGHT 1 lb. / 0.4kg 2 lb. / 1kg DISPLAY 6-Digit, 7-Segment, 25mm (1”) LCD with Backlight... -
Page 4: Unpacking & Setup
UNPACKING & SETUP PACKING LIST • Scale Base • DC9V 600mA Power • Manual Adapter • Indicator with Bracket • Pole UNPACKING & ASSEMBLY 1. Take the base out of the package Fig. 1 and place it on a work table with the feet facing up. -
Page 5: Display & Keypad
DISPLAY CHARACTERS SYMBOL DIGIT SYMBOL DIGIT SYMBOL DIGIT... -
Page 6: Indicator Display
INDICATOR DISPLAY Capacity: 150lb x 0.05lb / 60kg x 0.02kg Legal for Trade 334BS150TX PRINT UNIT TARE FUNC TOTAL DATA PRESET • - Scale is zeroed, gross weight is 0, tare is 0. • - Scale is stable. • NET - Display reading is net weight; tare is not 0. -
Page 7: Function Keys
FUNCTION KEYS NOTE: Normally, the 2nd function of a key needs to be pressed down for > 3 sec. to be activated. PUSH DEFINITION MODE TIME Enters or Exits HOLD Mode <3 Seconds Weighing, Counting, or Percent Mode Enters SETUP Mode >3 Seconds HOLD Returns to last sub-menu... -
Page 8: Operation & Settings
OPERATIONS & SETTINGS NORMAL WEIGHING MODE 1. Power on the scale by pressing the POWER key. 2. If the display stabilizes but doesn’t show zero, press the POWER key to set new zero point. 3. Place the objects on the scale platform and read the weight on the indicator. Note: Objects should be placed at the center of the platform. - Page 9 CHECK WEIGHING (DATA COMPARE) The check weighing or data compare function allows the user to input a pre-set range, and the display will indicate whether the weighed value is within that range, and indicate if it is too high or too low. 1.
-
Page 10: Troubleshooting
COUNTING MODE & CHECK COUNTS IN COUNTING MODE Disabled for Legal-for-Trade applications. WORK WITH UPS WORLDSHIP Set scale port to NCI3835 in UPS worldship. TROUBLESHOOTING SYMPTOM PROBABLE CAUSE SOLUTION Re-plug the AC adapter or rotate the plug AC Adapter is not connected securely to securely connect it to the scale Scale does not Low battery... - Page 11 SYMPTOM PROBABLE CAUSE SOLUTION Re-set CONFIG parameters per the CONFIG parameters are not correctly set manual CAL parameters are not correctly set Re-calibrate the scale USER parameters are not correctly set Re-set USER parameters per the manual Input data or loaded weight is too small, Input correct data, load correct weight or too big onto platform...
Need help?
Do you have a question about the 334BS150TX and is the answer not in the manual?
Questions and answers