Related Manuals for AVA WEIGH 334PCS40
Summary of Contents for AVA WEIGH 334PCS40
- Page 1 12/2017 USER MANUAL Digital Price Computing Scales Legal for Trade 334PCS40 334PCS40T 40 lb. 40 lb. w/ Tower...
-
Page 2: Table Of Contents
Specifications......................2 Unpacking & Setup ....................3 • Packing List ..................................3 • Assembly ....................................3 Display & Keypad ....................... 4 • Faceplate (334PCS40) ..............................4 • Faceplate (334PCS40T) ..............................4 • Keypad Functions ................................5 • Character Display Key ..............................6 Operation & Settings ....................7 Calibration ........................ 17 Display Symbol Meanings .................. -
Page 3: Specifications
SPECIFICATIONS 334PCS40 334PCS40T LB unit: 40lb x 0.01lb LB unit: 40lb x 0.01lb MAX CAPACITY OZ unit: 640oz x 0.2oz OZ unit: 640oz x 0.2oz KG unit: 20kg x 0.005kg KG unit: 20kg x 0.005kg MIN WEIGHT 0.2lb / 0.1kg / 4oz 0.2lb / 0.1kg / 4oz... -
Page 4: Unpacking & Setup
Weighing Platforms • Manual (334PCS40T Only) ASSEMBLY 334PCS40 1. Install the weighing platforms onto the base, with the pan properly aligned. 334PCS40T 1. Install the weighing platforms onto the base, with the pan properly aligned. 2. Install the tower display. -
Page 5: Display & Keypad
DISPLAYS 334PCS40 334PCS40 Front Display WEIGHT UNIT PRICE 334PCS40 SAVE WXYZ WEIGHT UNIT PRICE ZERO SAVE $/kg $/lb $/oz ZERO PQRS SAVE TOTAL PRICE ($) WXYZ $/kg $/lb $/oz ZERO SAVE UNIT TARE Capacity: 40lb. x 0.01lb. / 20kg x 0.005kg... -
Page 6: Keypad Functions
WEIGHT KEYPADS UNIT PRICE 334PCS40 $/kg $/lb $/oz ZERO SAVE TOTAL PRICE ($) Capacity: 40lb. x 0.01lb. / 20kg x 0.005kg Legal for Trade PRINT AC CHARGE SAVE WXYZ ZERO PQRS UNIT TARE CLEAR ENTER PRINT ALT GR 334PCS40T 334PCS40T... -
Page 7: Character Display Key
DISPLAY CHARACTERS SYMBOL DIGIT SYMBOL DIGIT SYMBOL DIGIT SYMBOL DIGIT Â Æ Ç È É Ê Ë Î Ï Ô Ù Û À Ü... -
Page 8: Operation & Settings
OPERATIONS & SETTINGS NORMAL WEIGHING MODE 1. Place the scale on a flat, stable surface. Level the scale using the leveling bubble at the lower left side of the display. 2. With the weighing platter empty, turn on power switch (located underneath on the right-hand side of the scale). - Page 9 SAVE FUNCTION 1. Under non-save mode, tare and unit price will be cleared automatically Press SAVE key to enter save mode. 2. Under save mode, tare and unit price will not be cleared automatically; Press SAVE key to exit save mode, if the gross weight is 0, to clear tare weight and unit price. PRINT FUNCTION In normal weighing mode, the zero function can be operated when the scale reading is stable (the weighing unit light is dim).
- Page 10 INPUT THE UNIT PRICE DIRECTLY 1. Use numerical key to enter unit price (range: 0000.00~9999.99) 2. Press ENTER key within 3s to confirm the unit price 3. Press CLEAR key to remove the input number 4. Put the weighing objects on the scale, the WEIGHT window will show its weight and TOTAL PRICE window will show it total value.
- Page 11 RECALL DIRECT PLU 1. Recall the stored direct unit price by pressing M1-MXX key, the recalled unit price will be displayed in UNIT PRICE window. The TOTAL PRICE window will display the first six characters of the item name, followed by the actual total price. RECALL INDIRECT PLU 1.
- Page 12 2.4 PrtNd4 (334PCS40/334PCS40T) is connected with OS-2130D, label dimension is 58mm × 40mm, no date will be printed on label) 2.5 PrtNd6 (334PCS40/334PCS40T) is connected with the 2130D, label dimension is 58mm × 60mm, no date will be printed on label)
- Page 13 8. Then, the WEIGHT window will display “USb.dFt” (data format), the TOTAL PRICE window will display data format xxx. Use 1, 2, 3 key to select data format: 1—8N1 8 bits data, no odd or even , 1 start bit, 1stop bit 2—7O1 7 bits data, 1 even , 1 start bit, 1stop bit 3—7E1 7 bits data, 1 odd, 1 start bit, 1stop bit, Press ENTER key to confirm the input and go to the next step, or use ON/OFF key to exit this mode.
- Page 14 9. Then, the UNIT PRICE window shows “Urt.CFt” (communication format), the TOTAL PRICE window shows communication format xxx. Use the numerical keys 0, 2 to select the communication format: 0—Non communication 2—When the scale becomes stable, the data will be output after pressing PRINT key, the format when “232.out”...
- Page 15 DATE & TIME SETTING 1. Under the normal working mode, press and hold 5 and ON/OFF key for more than 3s to enter into this mode. In this mode, you can set the system date and time. Note: the date and time will be lost after the scale is powered off if the rechargeable battery is not installed. 2.
- Page 16 2130D will print out a new blank label sample using new start position, and then exit this mode PLU UPLOAD & DOWNLOAD 1. Connect the scale to PC through RS232 interface, run 334PCS40-40T.exe, this software can only process *.xls files.
- Page 17 5. Choosing “Download” in “Serial” menu or F8, the scale will display “DNLOAD”, the status bar will display the present download information, if it displays “downloading business name”, it means it’s downloading the store name. If it displays “Downloading Mxx”, it means it’s downloading the information of M1~M9 (direct unit price).
-
Page 18: Calibration
CALIBRATION The calibration switch is located underneath the scale base. When the switch is set towards the USB or RS232 interface, it means CAL switch is on. When the switch is set towards the power switch, it means the CAL switch is off. 1. -
Page 19: Display Symbol Meanings
DISPLAY SYMBOL MEANINGS Weight signal is too large No proper data can be displayed Weight signal is too small Zero point is over the setting range Zero point is below the setting range Error in unit key operation The setting parameter(s) is not in normal range There is an error in calibration ADC is over max. -
Page 20: Troubleshooting
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Check that the batteries are Batteries loaded incorrectly, correctly loaded, if correct, replace or adapter/plug loose/not batteries. Check power supply connected connections. No Display Damage to electrical Replace with new PCB components Key button malfunction Replace with new Key button Power-On Problem... -
Page 21: Battery Charging
PROBLEM POSSIBLE CAUSE SOLUTION Different Areas of the Platform Give Platform or feet are not level; Ensure the platform is level and Different Weight Load cell broken; that all four feet are on a solid, Readings Objects between Load Cell & level surface;...
Need help?
Do you have a question about the 334PCS40 and is the answer not in the manual?
Questions and answers
Display not showing numbers
The display on the AVA WEIGH 334PCS40 may not show numbers due to the following reasons:
- Batteries are loaded incorrectly or are depleted.
- Adapter or plug is loose or not connected.
- Damage to electrical components.
- Key button malfunction.
- Crystal oscillator on the PCB is faulty.
- MCU is not correctly inserted.
- LCD connect pins are broken.
- PCB or load cell malfunction.
Check power supply connections, battery placement, and inspect internal components as needed.
This answer is automatically generated
On a 3 lb weight, the readout says 200 lbs
need to get a new charging cord
Not printing on label properly
The AVA WEIGH 334PCS40 may not be printing on labels properly due to several possible reasons:
1. Incorrect label format or size setting – ensure the label dimensions match the printer setup (e.g., 58 x 40mm or 58 x 60mm).
2. Communication issue with the OS-2130D printer – check the connection between the scale and printer.
3. Failure to confirm unit price – the unit price must be entered and confirmed within 3 seconds, or it is automatically set or cleared.
4. Non-save mode – in this mode, the unit price is cleared after weighing, which can affect printing.
5. PLU settings not recalled or saved properly – ensure correct PLU address is used (1 to 265, M1–M5 for direct access).
Check these settings and procedures to resolve the printing issue.
This answer is automatically generated