SPECIFICATIONS Model 2214LK Power 650W Voltage 220-240V Frequency 50-60Hz No-Load Speed 0-2800 RPM Chuck Size 13mm Chuck Type Keyed Max Capacity in Concrete 13mm Max Capacity In Wood 25mm Max Capacity In Steel 13mm Weight Supplied In Includes Auxiliary Ronix-design...
GENERAL POWER TOOL SAFETY WARNINGS WARNING! - Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and or serious injury. - Save all warnings and instructions for future reference. WORK AREA SAFETY - Keep work area clean and well lit.
Page 4
operating a power tool. Don’t use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. - Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
power tool accidentally. - Store idle power tools out of the reach of children and don’t allow persons unfamiliar with power tool or these instructions to operate the power tool. Power tools are dangerous in the hand s of untrained users. - Maintain power tools.
- Hold the tool firmly with both hands. Always use the side grip. - Keep hands away from rotating parts. - Do not leave the tool running. Operate the tool only when hand-held. - Don’t touch the drill bit or the work piece immediately after operation; they may be extremely hot and could burn your skin.
DEPTH GAUGE The depth gauge is convenient for drilling holes of uniform depth. Insert the depth gauge into the hole in the grip base. Adjust the depth gauge to the desired depth and then tighten the clamp screw to secure the depth gauge. Depth Guide Side Grip...
Page 8
After replacing brushes, running tool with no load for about 10 minutes. Then check the tool while running, when releasing the switch trigger. If the tool is not working well, ask nearest RONIX SERVICE after sales center for repair. To maintain product safety and reliability, repairs, carbon brushes...
Need help?
Do you have a question about the 2214LK and is the answer not in the manual?
Questions and answers