Description Of Pc Software - Homepage; Zone) - Alpine PXE-R100-8 Instructions Manual

Description of PC software - Homepage (sound zone)
Temperature
Sound Zone I
Master audio source selection
Optical
Auxiliary audio source selection
Optical
Sound Zone II
Master audio source selection
Optical
Pre-set sound
Online sound
effects
effects
Pre-set 1
When sound zone switch is turned on, the sound zone interface is shown in the figure above.
1 Sound zone switch
2 Sound Zone I
3 Sound Zone II
Caution:
1. The master audio source and auxiliary audio source of Sound Zone I are mutually exclusive and cannot be
superimposed; otherwise, the auxiliary audio source will be invalid (optical and coaxial are both digital audio
sources and cannot be superimposed);
2. The Sound Zone I and Sound Zone II channels are mutually exclusive and cannot be superimposed.
File Options Encryption
DSP
TREBLE PROTECTION
Firmware update
Noise threshold
Built-in power amplifier
X-Over divider data
Sound zone switch
Reset device parameters
Bluetooth
Restore factory settings
Shutdown delay
Language
About
Coaxial
Coaxial
Pre-set 2
Pre-set 3
Turn on sound zone switch to make sound zone settings. You can match the audio
sources of the front and rear sound fields flexibly (identical channels or sources are
mutually exclusive). The front sound field supports both master and auxiliary audio
source settings, and the rear sound field supports the master audio source settings,
which achieves free combination of different channels and sources in the front and
rear sound fields. For example, navigation tones are played on a selective channel in
the front sound field, and the rear-view entertainment system is played on a selective
channel in the rear sound field.
Channel setting: Slide left and right to select the output channel to set. There are 10
channels to choose from. (Channels in different sound fields are mutually exclusive.)
Channel volume: The volume adjustment range is 0 ~ 35.
Audio source: Switch master audio source (optical, coaxial, Bluetooth, high voltage
level, and low voltage level); and switch auxiliary audio source (optical, coaxial,
Bluetooth, high voltage level, low voltage level and off).
Primary source attenuation: The higher the attenuation of master audio source, the
lower the master volume is. The range of attenuation is 0% ~ 100%.
Channel setting: Slide left and right to select the output channel to set. There are 10
channels to choose from. (Channels in different sound fields are mutually exclusive.)
Channel volume: The volume adjustment range is 0 ~ 35.
Audio source: Switch master audio source (optical, coaxial, Bluetooth, high voltage
level and low voltage level).
Master
volume
High voltage level
Bluetooth High voltage level
Bluetooth
Pre-set 4
Clipping distortion indicator
EQ
Homepage
Sound Zone I volume
Master audio source attenuation
Low voltage level
Low voltage level
Sound Zone
II volume
High voltage level Low voltage level
* Click the right mouse button to delete pre-set sound effects.
Pre-set 5
Delay
Frequency
combination
OFF
Pre-set 6
16