Table of Contents
Advertisement
Description of PC software - Homepage
Temperature
Master audio source selection
Bluetooth
Auxiliary audio source selection
Bluetooth
Pre-set sound
Online sound
effects
effects
Pre-set 1
1
Temperature display
2
File
3
Options
4
Encryption
5
Device voltage display Detect the system operation voltage.
6
Mute button
7
Master volume
Clipping
distortion
8
indicator
Master audio source
9
attenuation
10 Pre-set sound effects
Auxiliary audio source
11
selection
Master audio source
12
selection
13 Connection indicator
File
Options
Encryption
Device voltage
Master volume
High voltage
level
High voltage
level
Pre-set 2
Pre-set 3
Detect the temperature on the device surface.
Load or save scene files on PC, and load or save all scene files.
DSP treble protection, firmware update, noise gate, built-in power amplifier, X-Over
divider data (with channel setting data available), restore factory settings, shutdown
delay, switch between English and Chinese, check the version number.
Enter a 6-digit password to encrypt the tuned sound effect data.
Mute the master volume
Push the fader left and right to adjust the master volume in the range of 0 ~ 35.
When the clipping distortion indicator shows yellow, it reminds the user to adjust the
device to make the signal balanced and in a distortion-free state. When the adjustment
is completed, the indicator shows gray (gray by default).
The higher the attenuation of master audio source, the lower the master volume is.
The range of attenuation is 0% ~ 100%.
Multiple sets of pre-set sound effects can be saved or recalled, and recall of online
sound effects is supported.
Switch auxiliary audio source (Bluetooth, high voltage level, low voltage level and
off).
Switch master audio source (Bluetooth, high voltage level and low voltage level).
Connect the PC and the host machine with a USB cable. Open the software to connect
the device. Click it again to turn off the connection.
Clipping distortion indicator
Homepage
Low voltage
level
Low voltage
level
* Click the right mouse button to delete pre-set sound effects.
Pre-set 5
Pre-set 4
Frequency
EQ
Delay
combination
Master audio source attenuation
OFF
Pre-set 6
14
Advertisement
Table of Contents
