Description Of Device Interfaces And Their Functions - Alpine PXE-R100-8 Instructions Manual

Description of device interfaces and their functions

External Bluetooth input
1
interface
2 USB 2.0 interface
3 Wired controller interface
4 Ambient light interface
5 Optical/Coaxial input interface
6 RCA audio input
High-voltage-level input
7
interface
8 Input select switch interface
9 Power lamp
10 Protection display lamp
High-voltage-level output
11
interface
12 RCA audio out
13 Vehicle audio player
14 External power amplifier
Select HD Bluetooth as the input signal, or connect to the PXE-R100-
8 mobile tuning APP. After the APP is successfully connected, the
Bluetooth icon is constant on.
A USB2.0 cable can be used to connect the computer and perform tone
tuning and setting in detail.
Volume adjustment, audio source selection and data recall can be
performed by connecting the wired controller.
Connecting the ambient light interface to control the operation of
ambient light.
Connecting the optical fiber cable or coaxial cable of the vehicle audio
player and switch the audio source of the device to a digital signal input
to play optical or coaxial digital signals.
One set of RCA audio signal input which can connect the RCA audio
signal output of the vehicle audio player.
Connected to the high-voltage-level output of the vehicle audio player.
If the switch is put to "ACC," the device will be started by ACC. If put
to "HOST," the device will be started by the high-voltage-level input
signal H1-/H1+.
Power lamp.
Protection display lamp.
Connect the power amplifier output of the device to speakers.
Five sets of RCA audio signal output which can be connected to the
external power amplifier.
Connect the vehicle audio player.
Connect the external power amplifier
6