Functional Parameters - Alpine PXE-R100-8 Instructions Manual

Functional parameters

Input signals
Output signals
Signal gain of output channel
Output signal equalizer
Output signal frequency divider
Output phase
Output delay
Pre-set sound effects
6 channels of high voltage level, 2 channels of RCA audio, high resolution
Bluetooth, optical/coaxial
8 channels of high voltage level, 10 channels of RCA audio
Range: mute, -60.0dB ~ +6.0dB
Type: parametric EQ, graphic EQ
Frequency: 20Hz ~ 40kHz; resolution: 1Hz
Q value (slope or gradient): 0.404 ~ 28.852
Gain: -12.0dB ~ +12.0dB; resolution: 0.1dB ~ 0.5dB ~ 1.0dB
Each output channel is equipped with independent multi-order high-pass filter,
Filter type: Linkwitz-Riley, Bessel or Butterworth
Filter cross-over frequency: 20Hz ~ 40kHz; resolution: 1Hz
Filter slope (gradient): -6dB/Oct ~ -48dB/Oct
Normal phase or reverse phase (0° ~ 360°)
0.000 ~ 20.000ms, 0 ~ 692cm, 0 ~ 273inch
Multiple sets of pre-set sound effects data can be saved in the device, call of
online sound effects is supported
22