Stanley DUBUIS KW Hydraulik BPP130U User Manual page 28

CRIMP SOFTWARE
The Worksite Reports tab allows you to group data log entries into a complete tool cycle report.
2
4
3
5
1. Click "Create Report".
2. Select the date range of the job you are reporting.
3. Select the crimp cycles you want to include in the report.
4. Select a user and a worksite.
Note: If this is the first time using the software, press the "Worksites" button to create a worksite.
5. Enter notes about the job in the Remarks field.
6. Click "OK" when finished.
7
7. Select a report from the reports list.
8. Click "Print Report to PDF" to export the Worksite Report.
14 ► BPP130U User Manual