Led Indicators; Regulatory Compliance - Net to Net Technologies SAM1000 User Manual

SAM1000-12 Bandwidth Options
Bandwidth (kbps) 1,168 784
Distance (feet)
Distance (meters) 2,743 3,353

LED Indicators

LED
PWR (Power)
SDSL LK (Link)
SDSL RX
(Receiving)
SDSL TX
(Transmitting)
(A pulsing LED blinks steadily at a rate of once per second. A flashing LED blinks at a more
rapid, less constant rate.)

Regulatory Compliance

FCC Regulatory Compliance Information for Class A Equipment
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may
210-0000011 rev03
528
9,000 11,000 13,000 15,000
3,962
State Indication
solid green unit is operational
pulsing SDSL connection is
green established and active
solid green problematic SDSL
connection
no no SDSL connection
illumination
flashing SDSL activity
amber
solid amber heavy Rx traffic
no no activity
illumination
flashing SDSL activity
amber
solid amber heavy Tx traffic
no no activity
illumination
272
4,572
Additional Information
If the Power LED is not illuminated, it is unlikely the
SAM1000-12 is receiving power and none of the LEDs
will be illuminated.
The SDSL link is operational and traffic is flowing.
A connection exists but there is indication of a problem
with the SDSL line.
The port is receiving either data from the remote SDSL
modem or statistical packets from the IP DSLAM
management.
The port is receiving large amounts of data from the
remote SDSL modem.
A link may exist but the port is not receiving any data
from the remote SDSL modem.
The port is transmitting data to the remote SDSL
modem.
The port is transmitting large amounts of data to the
remote SDSL modem.
A link may exist but the port is not transmitting any
data to the remote SDSL modem.