Zepro ZS MK2 Technical Manual page 13

Control card
2.1.5 Control device input
The control devices are connected to the control device input section and powered by the control device pow-
ersection of the control card. They are used to input user comands into the control card so that they can be
interpretedand executed. The control devices can be grouped into two groups depending on their functionality:
primary and secondary devices. Primary devices are fixed on the outside of the box body or on the tail lift itself
and can operate all functions of the tail lift without any limitations. The most common primary control devices
for the ZS MK2 are shown below.
Fig 8. CD 20
Fig 9. CD 3
www.zepro.com 13