Table of Contents
Advertisement
Assemble the lower handle (Fig. C)
Attach the two tooth clamps to the lower handle.
Attach the lower handle to the lawnmower (Fig. D)
Install the lower handle to the lawnmower with the quick release clamps (with fixed in screw).
Make sure that the teeth of fixing gears interlock correctly.
Attach the top handle to the lawnmower (Fig. E)
Mount the top handle to the lower handle by using two quick release clamps (screw with
curved head)
NOTE: Ensure the assmelby holes for the upper handle, the lower handle and the
rubber sleeve are in straight line, then to assmeble the quick release clamps.
Fitting the cable clip (Fig. F)
Ensure that the cable clips supplied are used to fix the cable to the lower handle
Attach the grass bag (Fig. G & Fig. H & Fig. I)
1.
Firstly Insert the grass bag handle into the groove of the grass bag.
2.
Secondly Press the grass bag handle into the clip of the grass bag, and hear "click" to
indicate thate the handle is in place.
3.
Attach the grass bag to the frame by fixing the plastic hooks onto the side and bottom.
Lift the safety flap with one hand and hook in the grass bag. Release the safety flap to secure
the grass bag in position.
If mowing with mulching plug (Fig. Q)
When mulching, remove the collection grass bag.
•
Step 1 Put the plastic mulching plug into the rear discharge chute.
•
Step 2 Down to place plastic mulching plug downwards.
•
Then release the flap, it will close back to cover the mulching plug.
NOTE: To ensure the two tabs on the bottom of the mulching plug into the two
grooves on the housing.
NOTE: To ensure that the cut grass can be mulched efficiently, do not cut high or
wet grass.
INSTALLATION
(Fig. H&I)
22
(Fig. G)
Advertisement
Table of Contents
