Table of Contents
Advertisement
DESCRIPTION OF PRODUCT
Parts description (Fig. A)
1.
Switch box
2.
Lower handle
3.
Carrying handle
4.
Battery pack cover
5.
Rear wheel
6.
Grass bag
7.
Quick release knob
8.
Switch lever
9.
Top handle
Check the delivery parts (Fig. B)
Remove the machine from its packaging carefully and make sure that all of the following parts
are present:
a.
Lawnmower with upper handle
b.
Grass bag
c.
Lower handle
d.
Manual
e.
Quick release knob
f.
Cable clip
g.
Battery pack
h.
Charger
WARNING: If any parts are damaged or missing, do not operate this tool until these
parts have been replaced. Failure to heed this warning could result in serious
personal injury.
NOTE: Always recycle the packaging in accordance with local recycling guidelines.
20
INSTALLATION
Assemble the lower handle
1.
Attach the lower brace to the deck. （Fig, C）
2.
Use two installation screws to fix the lower brace.（Fig, D）
Attach the top handle to the lawnmower (Fig. E)
Mount the top handle to the lower handle using the two bolts and handle knobs.
Fitting the cable clip (Fig. F)
Ensure that the cable clips supplied are used to fix the cable to the lower handle
Assembly of the Grassbox
1.
Align the top half of the grass box cover to the lower part and clip to together --start at
front and work around the grassbox until fully clipped together. （Fig. G）
2.
Now assemble the grassbox handle as per fig H
Attach Grassbox to the Lawnmower
Lift the lawnmower Safety flap and locate the Grassbox onto the lawnmower support hooks
fig I
21
Advertisement
Table of Contents
