Installation - Yard force LM T46 Original Instructions Manual

108v cordless lawnmower
Table of Contents

Advertisement

INSTALLATION

Unfold the handle
1.
Rotate the handle quick release levers to release the operation handle (Both sides).
(Fig. C)
2.
Rotate the handle and then position the lower handle lock pin into the mower bracket -
one of the three angle positions (Both sides). (Fig. D)
3.
Lock the handle in place by closing the handle quick release levers- make sure that the
handle is securely locked in position (Both sides). (Fig. E)
Assemble the upper handle (Fig. F)
Lift the upper handle, and lock in place using the handle tension knob and tensioning bolts.
Ensure the lower and upper handles are firmly connected.
Fitting cable clips (Fig. G)
Locate the cable into the cable clip and then clip securely to the handle. (Both sides).
Attach the grass collection bag
Attach the grass collection bag to the frame by fixing the plastic hooks onto the side (Fig. H)
Lift the rear safety flap with one hand and hook in the grass collection bag. Release the rear
safety flap to secure the grass collection bag in position. (Fig. I)
Installing the mulching plug (Fig. J)
NOTE: Switch off the tool and make sure that the blade has stopped completely.
1.
Lift the rear flap with one hand and push the mulching plug into the rear discharge chute
until it is locked in place. Make sure that the mulching plug is locked in position.
2.
Release the rear safety flap, it will close back to cover the mulching plug.
Installing the side discharge chute (Fig. K&L)
NOTE: Switch off the tool and make sure that the blade has stopped completely.
1.
Removal of the Mulching plug
2.
Lift the side discharge cover with one hand and hook in the side discharge chute with
the other hand.
3.
Release the side discharge cover to secure the chute in position.
22
INSTALLATION
Set required function
WARNING! Before changing any accessory, switch off the tool and make sure that
the blade has stopped completely
NOTE: This lawnmower has three functions. These functions can be converted by changing
accessory setting as described above. Please see the following chart for detail.
Mulching plug
Collection *
×
Mulching *
Side Discharge *
"√": installed "×": uninstalled
* The following information:
Collection: The grass has been cut and collected by grass collection bag.
Mulching: Mulch the grass, by cutting into small pieces which then degrade and fertilise the
lawn.
Side discharge: the grass has been cut and distributed to the side of the machine.
Grass collection bag
Side discharge chute
×
×
×
×
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Y0j-sp01-46

Table of Contents