Subscribe to Our Youtube Channel
Related Manuals for Powerplus POWDPG6010
Summary of Contents for Powerplus POWDPG6010
- Page 1 POWDPG6010 ROBOT MOWER /ROBOTMA AIER / TONDEUSE ROBOT/MÄHROBOTER INSTALLATION GUIDE INSTALLATIEGIDS/MANUEL D’INSTALLATION INSTALLATIONSANLEITUNG MANAGE THROUGH APP APP BESTURING/CONTRÔLE PAR APPLICATION/APP-STEUERUNG...
-
Page 2: Package Contents
• 1 installation guide • 200 fixing pegs for boundary wire The future is now Congratulations on your new Powerplus robot mower. You no longer have to spend your time on lawn maintenance because your smart garden assistant will keep your lawn perfectly neat for you, throughout the year. -
Page 3: Preparing The Charging Station
Make sure to place it on even ground! Allow for a 2m straight line of wire at the front and a 1m straight line at the back of the charging station. POWDPG6010 - Installation guide... -
Page 4: Installing And Connecting The Charging Station
• We recommend placing the charging station as close as possible to a power outlet. The included power cord is 10m in length. • Place the station in a shaded area, so the robot mower is not exposed to the sun for too long. Installation guide - POWDPG6010... - Page 5 The robot mower is compatible with all 20V and 2x20V Dual Power batteries. POWDPG6010 - Installation guide...
- Page 6 30cm for flower beds 30cm for gravel paths 10cm for patios that 75cm for ponds that if there’s no risk of are at the same level are at the same level collision as the lawn as the lawn Installation guide - POWDPG6010...
-
Page 7: Installing The Boundary Wire
75cm between each peg. Especially when placing the wire around flower beds, shrubs or other obstacles. Now use your sketch to lay out the boundary wire according to the mowing area you drew earlier. POWDPG6010 - Installation guide... -
Page 8: Connecting The Charging Station
Connect the end of the wire to the red clamp on the charging station. You’ve now finished the more technical part of the installation. The next steps will have you switch on the mower and send it on its first ride out. Installation guide - POWDPG6010... - Page 9 Press START and then press OK to manually switch on the mower. After a short self-test, the robot mower will trace the entire route laid out by the boundary wire in a clockwise manner. Afterwards, it will return to the charging station, to then start mowing. POWDPG6010 - Installation guide...
- Page 10 Adding the mower to the app Activate your Bluetooth and connect the mower with the app. Make sure to be within a 6m radius of the mower. The serial number will be visible after scanning while connected to Bluetooth. 10 | Installation guide - POWDPG6010...
-
Page 11: Using The App
• guard and operate the mower • immediately be notified of any error messages • update the robot software online Mowing patterns The random pattern ensures your lawn is mowed evenly, without visible lines. POWDPG6010 - Installation guide | 11... -
Page 12: Maintenance And Protection
Pull the charger’s plug from the power outlet. Thoroughly clean the robot mower before storing it. Grass contains acids that could damage the mower. Be sure to remove all grass remnants with a brush and a moist cloth. 12 | Installation guide - POWDPG6010... - Page 13 Need help? Check our website first. Still haven’t found what you’re looking for? Contact our technical support team at +32 (0)3 292 92 90 or via e-mail at support@varo.com. POWDPG6010 - Installation guide | 13...
- Page 14 WWW.VARO.COM - Designed and marketed by Varo © Varo VARO - VIC. VAN ROMPUY nv - JOSEPH VAN INSTRAAT 9 - 2500 LIER - BELGIUM...
Need help?
Do you have a question about the POWDPG6010 and is the answer not in the manual?
Questions and answers