Advertisement
KD-S730
KD-S630
@ Removing the main board
(See Fig.5,Fig.6)
1.Remove two screws @ retaining the main
board.
2.Locate the rear side of the unit.
3.Remove
the three screws @) retaining the rear
bracket.
4.Lift up the main board to remove it, at this time
remove the connections CN501 and CN502
connecting the main board and CD mechanism
assembly.
Main board
@ Removing the CD mechanism assembly
(See Fig.7)
Remove three screws @ retaining the CD
mechanism assembly from the top cover.
@ Removing the operation switch board
(See Fig.9)
1.Locate the rear side of the front panel unit .
2.Remove four screws ©) retaining the rear cover.
3.Remove the operation switch board off on the front
Panel.
Operation
switch board
Rear cover
Fig.8
2-11,
Advertisement
