Blade Specification
265019700G
265017540G
265017550G
265017560G
265017530G
Blade Specification
For cutting thick fluorescent and window tint film. Also for cutting
detailed work in standard vinyl.
The blade is 45° with Red Cap, 0.25 mm blade offset, and 2.5 mm
blade diameter.
For cutting reflective vinyl, cardboard, sandblast, flock, and stencil
sharp edge.
The blade is 60° with Green Cap, 0.50 mm blade offset, and 2.5 mm
blade diameter.
For cutting thin sandblast mask and stencil. The blade with sharp
angle and special design, allowing it to maneuver around sharp
corners.
The blade is 60° with Blue Cap, 0.25 mm blade offset, and 2.5 mm
blade diameter.
For cutting small text and fine detail. Sharp blade with smallest offset.
The blade is 50° with Black Cap, 0.175 mm blade offset, and 2.5 mm
blade diameter.
For thin and delicate media such as window tint.
The blade is 25° with Yellow Cap, 0.25 mm blade offset, and 2.5 mm
blade diameter.
A-2
RX II User Manual