Package Checklist; Tools Required - Paradyne 5030 Installation Instructions Manual

Pots splitter

Hide thumbs Also See for 5030:

Table of Contents

Preparation

Verify that the local loop POTS service is connected to the POTS/SuperLine network at

the punchdown block or NID.

For information about the SuperLine Integrated Access Device (IAD), which is the

customer premises equipment that will be connected to the SuperLine jack, refer to:

Document Number

6500-A2-GN10

Package Checklist

Verify that your package contains the following:

POTS splitter and housing with closure screw

Small plastic bag with two 8-15 x 1 Type A combination Phillips/slotted-head

screws and two 1 plastic anchors

Flat-blade screwdriver to tighten terminal screws

3/8 nut driver to close housing securely

Phillips-head or combination Phillips/slotted-head screwdriver to mount the housing

Drill and 3/16 drill bit to mount the housing in cement or cinder block

Document Title

SuperLine IAD, Models 6501, 6502, 6510, 6511, and

6512, Installation Instructions

Table of Contents