Table of Contents
Advertisement
to monitor signal reception, audio levels, and other status
information for the receivers.
For details, see "Main Window" on page 29.
The following settings are also available.
Group control settings: Changes the setting of each
respective button for all the receiver channels displayed in
the status viewer at one time.
Note
This does not appear under factory default settings.
All muting: Enables audio output muting for all the
receiver channels displayed in the status viewer.
All unmuting: Disables audio output muting for all the
receiver channels displayed in the status viewer.
Clear AF Peak hold: Releases the hold status of the AF
level meters that appear in the status viewer.
For details, see "[Other settings] Window" on page 57.
You can select whether to display or hide [All muting],
[All unmuting], and [Clear AF Peak hold] in the [Display
settings] window.
For details, see "[Display settings] Window" on page 54.
d [Device List] window
Lists the receivers and RMU-01 units that exist on the
network.
The devices in the list can be registered to the status viewer
for monitoring, or controlled by opening their [Property]
windows.
For details, see "[Device List] Window" on page 27.
e Sub window
Consists of the following tabs:
[Message Log] tab
Displays warnings and error messages that occurred for
devices. The warnings and error messages that appear here
are automatically saved as log files.
For details, see "[Message Log] Tab" on page 32.
[Property List] tab
Displays a list of setting values for multiple receivers and
transmitters. The devices displayed here are those that are
registered to the pages displayed in the status viewer. You
can control the receivers and transmitters by selecting the
cells in the list and modifying the settings.
For details, see "[Property List] Tab" on page 33.
[RF Chart Grapher] tab
Records the signal reception status obtained from the
receivers and up to 24 hours worth of warnings related to
the reception status.
For details, see "[RF Chart Grapher] Tab" on page 34.
[RF Chart Analyzer] tab
Allows you to view the information saved in the RF Chart
Grapher tab.
For details, see "[RF Chart Analyzer] Tab" on page 40.
[Spectrum Analyzer] tab
Allows you to confirm the signal reception status of the
used frequency bands obtained from the receivers.
For details, see "[Spectrum Analyzer] Tab" on page 40.
[Simple Status Viewer] tab
Allows you to narrow down the receiver channel
information registered to each status viewer page to a
certain few items, such as the RF meter, QL meter, and
alerts, and display only those items.
For details, see "[Simple Status Viewer] Tab" on page 42.
12
Advertisement
Table of Contents
