Table of Contents
Advertisement
a Reception channel information
Indicates the group, channel and frequency information for
the receiving signal.
b QL (signal quality level) meter
Indicates the quality of the received data in a meter.
This meter allows you to monitor quality deterioration of
received signals caused by reduced RF signal reception
sensitivity that may occur when the receiver is too far from
the transmitter or when there is signal interference.
"QL" on the left side of the graph lights up red when the
audio data quality is low.
c AF/PEAK (audio input/peak) level meter/indicator
Indicates the level of audio signal input to the transmitter
according to 32 levels. When a signal exceeding the peak
audio level is input, "AF/PEAK" appears to the right of the
level meter.
d RF transmission power display
Indicates the transmission power setting of the transmitter
based on metadata received from the transmitter.
H: Transmission power is 50 mW
M: Transmission power is 10 mW
L: Transmission power is 1 mW
e Digital output synchronization display
Indicates the synchronization status of the output signal
from the DIGITAL OUT connector of the receiver.
INT: The output signal is synchronized to the internal
clock.
EXT: The output signal is synchronized to the signal input
from the WORD SYNC IN connector.
f Wireless remote control condition display
Indicates the communication status of the paired
transmitter according to four levels.
: Good transmission
: Somewhat good transmission
: Somewhat poor transmission
: Poor transmission
(red indication): Unable to communicate with paired
transmitter
Note
This icon does not appear when the RF REMOTE function
on the receiver is turned off.
g Battery condition display
Indicates the transmitter's battery condition according to
eight levels based on metadata received from the transmitter.
The battery icon changes to red when the level is low.
h Audio output control/indicator
Indicates the status of audio output for the receiver channel.
Clicking the icon toggles the status of audio output.
: Audio output is enabled. Clicking the icon will enable
muting of the audio output.
: Audio output muting is enabled. Clicking the icon
will disable muting of the audio output.
Note
This setting can only be changed if the [Individual muting/
unmuting] checkbox is selected in the [Display settings]
window.
For details, see "[Display settings] Window" on page 54.
i Transmitter name
Indicates the name of the transmitter according to the meta
data that the receiver receives from that transmitter.
j RF (radio wave) level meter/diversity indication
Indicates the radio wave input level according to eight
levels. The number of segments that light up depends on
the input level.
The diversity selection result (a or b) appears on the left
side of the level meter.
"RF" on the left side of the level meter lights up red when
the level drops.
When the RF input level is high, "RF" lights up yellow.
When you are configuring channels at equal intervals
during digital multi-channel operations, we recommend
adjusting receiver and antenna settings so that "RF" does
not light yellow.
Operating the pages in the status viewer
You can add, delete, and rename pages in the status
viewer.
Notes
• The same name cannot be used for more than one page.
• Page names must consist of alphanumeric characters
only.
• Be careful when deleting pages, as deleted pages cannot
be restored.
• The [All tuners] page cannot be renamed or deleted.
To add a status viewer page
Click the [+] tab at the far right in the upper part of the
status viewer. You can also right-click within a tab and
select [Add a new page] in the context menu that appears.
After you enter a name and click [OK] in the dialog box
that appears, the new page is added.
To rename a status viewer page
Click a tab in the upper part of the status viewer to display
the page you want to rename.
Right-click within the tab and select [Change name of
<page name>] in the context menu that appears.
After you enter a new name and click [OK] in the dialog
box that appears, the page is renamed.
30
Advertisement
Table of Contents
