Table of Contents
Advertisement
Warming Unit
TEMPERATURE IN RANGE INDICATOR
The temperature in range indicator illuminates when the output air temperature is within the range
of the selected level.
MAIN POWER INDICATOR
The main power indicator illuminates when the warming unit is connected to a power source. This
indicator must be illuminated for any functions to operate.
SYSTEM
ON/STANDBY
Push this button to turn the warming unit either ON or OFF. The indicator directly above the
switch illuminates when the warming unit is ON.
OVER HEAT INDICATOR
The Over Heat Indicator illuminates and an audible alarm sounds when an over-temperature condition
is detected. To reset, turn the warming unit OFF and then ON, using the System ON/STANDBY
button. (Also refer to the Warnings section of this manual.)
TEMPERATURE INDICATORS
The temperature indicators illuminate up to the selected temperature level. When the warming unit
is initially turned on, none of these indicators are illuminated and ambient air will be delivered.
TEMPERATURE SELECT
Push this button to increase the temperature setting level by level to the desired setting. When the
temperature setting is at HIGH, push the button again to return to delivery of ambient air.
LOW 32'C
Figure H. Control panel of the Model 505 warming unit
Control Panel Features of the Model 505
0
MED38'C
0
r
HlGH43'C
0
,=,
I
MAIN POWER
0 OVER HEAT
0
HusgeT Warming Unit-Model 505
TEMP IN RANGE
Bair
Advertisement
Table of Contents
