Kit Contents; Specification; Device Information - Texas Instruments BQ25308 User Manual

Evaluation Module Overview
1 Evaluation Module Overview
1.1 Introduction
The BQ25308EVM is an evaluation kit for the BQ25308 integrated battery charge management IC.
This user's guide provides detailed testing instructions for the BQ25308 evaluation module (EVM). Also included
are descriptions of the necessary equipment, equipment setup, procedures, the printed-circuit board layouts,
schematics, and the bill of materials (BOM).
Throughout this user's guide, the abbreviations EVM, BMS005, and the term evaluation module are synonymous
with the BQ25308 evaluation module, unless otherwise noted.

1.2 Kit Contents

1.3 Specification

PARAMETER
VBUS
VBAT
TS
I
VBUS
I
SW

1.4 Device Information

For detailed features and operation, refer to
Device
BQ25308
The BMS005 evaluation module (EVM) is a complete charger module for evaluating an integrated, standalone,
synchronous buck battery charger using the device listed above.
2 BQ25308 Evaluation Module
Item
BQ25308EVM
CONDITIONS MIN
4.1
Table 1-1 for the device and data sheet.
Table 1-1. Device Data Sheet
Data Sheet
SLUSFD7
Copyright © 2024 Texas Instruments Incorporated
Quantity
1
TYP MAX
17
4.2
5
3
3
EVM Label Variant
BQ25308EVM 009
www.ti.com
UNIT
V
V
V
A
A
SLUUD09 – APRIL 2024
Submit Document Feedback