Table of Contents
Advertisement
Reservoir/rear bushing disassembly
1. Press CLEAN button to purge
evaporator. Turn power OFF
when LO WATER lights.
Note: In many applications,
removing the
gearmotor, main
housing, and auger
will allow for the
ice machine to be
pulled out further for
better access to rear
components.
2. Slide ice machine forward to
gain access.
3. Use Fig. 32 as disassembly
guide.
Note: Use petrogel when
installing/reinstalling
o-rings.
Attention:
Access to the reservoir
and rear bushing
is accomplished by
disconnecting the
suction and liquid line
quick disconnects. These
disconnects are self-sealing
and do not require unit to
be pumped down. When
disconnected, unit can be
pulled forward for access.
28
Fig. 33
Fig. 34
HC_1810R/N, HC_2110R/N, HM_1810R/N, HM_2110R/N
Advertisement
Table of Contents
