Follett M25577 Operation And Service Manual page 26

26. Slide gear motor onto auger and install gear motor
bolts (9/16" wrench).
27. Connect gear motor wires.
28. Pry auger forward and rotate auger using 1/2"
wrench to align keyways.
29. Insert key fully.
30. Pry shaft forward to install retainer fork.
26
Fig. 26
Fig. 27
Fig. 28
Fig. 29
HC_1810R/N, HC_2110R/N, HM_1810R/N, HM_2110R/N