Model 3820 Network Connection
Use the following procedures to connect a Model 3820 to the dial or 2-wire leased-line
network interface:
1. Insert the 6-position, 4-conductor modular plug into the jack labeled DIAL / LEASED
(3820).
2. Insert the other end of the modular cord into the network interface.
0
1
PWR
6-POSITION,
4-CONDUCTOR PLUG
FOR TELEPHONE SET
PHONE
DIAL
LEASED
LEASED
(3810)
(3820)
6-POSITION, 4-CONDUCTOR PLUG FOR
PERMISSIVE DIAL NETWORK OPERATION
(CONNECTS WITH RJ11C TYPE JACK)
– OR –
2-WIRE LEASED-LINE NETWORK OPERATION
(CONNECTS WITH 6-POSITION CENTER PAIR
LEASED JACK)
5
NMS
DTE
98-13071-02