Safety Instructions - Paradyne 9161 Installation Instructions Manual

Safety Instructions

Important Safety Instructions
Refer to
!
HANDLING PRECAUTIONS FOR STATIC-SENSITIVE DEVICES
This product is designed to protect sensitive components from
damage due to electrostatic discharge (ESD) during normal
operation. When performing installation procedures,
however, take proper static control precautions to
prevent damage to equipment. If you are not sure
of the proper static control precautions, contact
your nearest sales or service representative.
!
WARNING:
Never install the access carrier on its side. Make sure that it is installed in an
upright position. You MUST ensure that the cards remain in a vertical, upright
position while the unit is operating.
on page 15.
3