Table of Contents
Advertisement
Step
Screw (quantity)
2
M1.6 × L2.1 mm, flat-head, nylon-coated (7)
Notes:
• A mylar might cover the trackpad, and ensure that you attach the mylar to the trackpad after
replacement.
• Ensure that the connector is attached firmly.
Step 2.
Install the trackpad and trackpad cable as shown below.
1. A trackpad jig might come with the trackpad which is used for fixing the location of the
trackpad. Attach the trackpad jig to the trackpad and bend the four angles as shown by arrows
below.
2. Install the trackpad with jig as shown.
Color
Torque
Black
0.181 Nm
(1.85 kgf-cm)
.
Chapter 8
Removing or replacing a FRU
89
Advertisement
Table of Contents
