Table of Contents
Advertisement
Before you start, read
Generic Safety and Compliance Notices
Attention: Do not touch the contact edge of the wireless WAN card. Otherwise, the wireless WAN card
might get damaged.
For access, do the following:
1. Disable the built-in battery. See "Disabling the built-in battery" on page 69.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display and turn over the computer.
4. Remove the base cover assembly. See "Base cover assembly" on page 71.
Note: A Mylar film might cover the wireless WAN card. To access the wireless WAN card, peel off the film
first.
Step 1.
Remove the wireless WAN card and its bracket as shown below.
Type 1
Type 2
76
ThinkPad X13 Gen 5 and ThinkPad X13 2-in-1 Gen 5 Hardware Maintenance Manual
and print the following instructions.
Advertisement
Table of Contents
