Lenovo ThinkPad X13 Gen 5 Hardware Maintenance Manual page 83

For ThinkPad X13 Gen 5
Step Screw (quantity)
2
M2 × 2.3 mm, flat-head, nylon-coated (1)
For ThinkPad X13 2-in-1 Gen 5
Step Screw (quantity)
2
M2 × 2.5 mm, flat-head, nylon-coated (1)
Step 2. When installing:
• For wireless WAN card with two antenna cables: ensure that you connect the orange cable to
the main connector, and the blue cable to the auxiliary connector.
• For wireless WAN card with four antenna cables: ensure that you connect the orange cable to
the main connector, the blue cable to the auxiliary connector, the white and grey cable to the M1
connector, and the black and grey cable to the M2 connector.
Note: If the Wireless WAN card thermal pad is damaged during replacement, remove the Wireless
WAN card thermal pad as below and apply a new one on the system board.
Color Torque
Black 0.181 Nm
(1.85 kgf-cm)
Color Torque
Black 0.181 Nm
(1.85 kgf-cm)
.
Chapter 8 Removing or replacing a FRU
77