Lenovo ThinkPad X13 Gen 5 Hardware Maintenance Manual page 92

Step 1. Remove the trackpad and trackpad cable as shown below.
Step Screw (quantity)
2
M1.6 × L2.1 mm, flat-head, nylon-coated (7)
Notes:
• A mylar might cover the trackpad, and ensure that you attach the mylar to the trackpad after
replacement.
• Ensure that the connector is attached firmly.
Step 2. Install the trackpad and trackpad cable as shown below.
1. A trackpad jig might come with the trackpad which is used for fixing the location of the
trackpad. Attach the trackpad jig to the trackpad and bend the four angles as shown by arrows
below.
86
ThinkPad X13 Gen 5 and ThinkPad X13 2-in-1 Gen 5 Hardware Maintenance Manual
Color Torque
Black 0.181 Nm
(1.85 kgf-cm)