Lcd Panel, Lcd Cable And Elastic Adhesive Tapes Of Thinkpad X13 2-In-1 Gen 5 - Lenovo ThinkPad X13 Gen 5 Hardware Maintenance Manual

Hide thumbs Also See for ThinkPad X13 Gen 5:
Table of Contents

Advertisement

LCD panel, LCD cable and elastic adhesive tapes of ThinkPad X13 2-in-1
Gen 5
For access, remove these FRUs in order:
• "Base cover assembly" on page 71
• "LCD unit" on page 101
• "Strip cover (for ThinkPad X13 2-in-1 Gen 5 only)" on page 104
• "LCD hinges of ThinkPad X13 2-in-1 Gen 5" on page 106
Step 1.
Remove the LCD panel, LCD cable and elastic adhesive tapes as shown below.
1. Pull out each tape slowly in the direction as shown until the adhesive tapes are all released
from LCD unit. Use your palms to slide down the LCD panel in the direction as shown to
loosen its hooks.
Note: Do not pull the tapes too fast, otherwise, the tapes might snap.
.
Chapter 8
Removing or replacing a FRU
109

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinkpad x13 2-in-1 gen 5

Table of Contents