Lenovo ThinkPad X13 Gen 5 Hardware Maintenance Manual page 66

Table 10. System board connector and cable guide
No.
Connector/feature
1
Wireless-WAN-card slot (internal)
2
LCD connector (internal)
3
Wireless-LAN antenna connector
4
M.2 Solid-state drive slot (internal)
5
Thermal fan connector (internal)
6
LCD connector (internal)
7
USB-C power connector
(Thunderbolt 4) (external)
8
USB-C power connector
(Thunderbolt 4) (external)
9
USB-A connector (USB 5Gbps,
Always On USB) (external)
10
Audio connector (external)
11
Speaker assembly connecter
12
Wireless-WAN antenna connector
13
Battery connector (internal)
14
Smart card reader-trackpad-NFC
cable (internal)
15
Keyboard connectors
16
60
ThinkPad X13 Gen 5 and ThinkPad X13 2-in-1 Gen 5 Hardware Maintenance Manual
Internal cable required
No
LCD cable
No
No
No
LCD cable
No
No
No
No
No
No
No
Smart card reader-trackpad-NFC
cable
Keyboard assembly cables
Cable connection
Insert a wireless-WAN card into
this slot.
Connect one end to the LCD panel
and the other end to this
connector.
Wireless-LAN antenna assembly
comes with the cable. Connect the
black cable to the AUX connector,
and connect the grady cable to the
MAIN connector
Insert a solid state drive into this
slot.
The thermal fan comes with the
cable. Connect the cable to this
connector.
Connect one end to the LCD panel
and the other end to this
connector.
Connect a USB-C compatible or
Thunderbolt 4 compatible device
to this connector.
Connect a USB-C compatible or
Thunderbolt 4 compatible device
to this connector.
Connect a USB-A compatible
device to this connector.
Connect headphones or a headset
with a 3.5-mm (0.14-inch) and 4-
pole plug to this connector.
Speaker assembly connecter
comes with the cable. Connect the
cable to this connector.
Wireless-WAN antenna comes with
the cable. Connect the cable to this
connector.
The battery comes with the cable.
Connect the cable to this
connector.
For smart card reader-trackpad-
NFC cable, connect one end of the
cable to the smart card reader, one
end to the trackpad,one end to the
NFC module and the other end to
this connector.
The keyboard assembly comes
with the cables. Connect the
cables to these connectors.