Table of Contents
Advertisement
3.
Use the - and + pistons to select the desired location:
Console:
Front:
Center:
Rear:
The default setting is Front.
4.
Press ENTER to confirm the changes, or
5.
Press the MENU piston to exit the menu.
The selected ambiance location position will be visible
on the display: in this example "Front".
5.2
Reverb
One of the 12 recorded convolution delay reverbs can be chosen.
1.
Select an Organ style, for which you want to change the
Reverb setting. Select the desired organ style for which
the acoustic setting can be changed. Press the button:
STYLE, then + or - buttons for selection and ENTER (see
§ 4.3 Organ styles).
2.
Press the MENU piston.
The first function appear.
Use the - and + pistons to select the Reverb menu.
3.
4.
Press the ENTER piston to enter the Reverb Settings.
The actual reverb setting (church name and place) of
the actual organ style is visible on the display.
5.
Use the - and + pistons to select the desired reverb,
for example Notre Dame, Paris. The Oude kerk,
Amsterdam is the default setting.
6.
Press ENTER to confirm the selected reverb, or
7.
Press the MENU piston to exit the menu.
Holding down the SET (or Enter) piston and pressing the Reverb piston
will also select the desired reverb – see points 4 to 7.
User Manual Studio 260 / 360 / P-360
You sit at the console
You sit at the front of the church
You are in the middle of the church
You sit at the back of the church
Ambiance
Front (default)
Johannus Menu:
Ambiance
Rom. Front
85
Tr: 0/440
M
1
Johannus Menu:
Ambiance
Johannus Menu:
Reverb
Oude kerk
Amsterdam (Def.)
Notre Dame
Paris
Notre Dame
Paris
Rom. Front
85
Tr: 0/440
M
1
30
Advertisement
Table of Contents
