2 INSTALLATION
2.1
Installation and connection
2.1.1
A
B
C
1.
Place the organ onto a sturdy, level surface.
2.
Lean the organ slightly backwards.
3.
Install the pedal board (C), see § 2.1.4.
4.
Set the organ upright.
5.
Place the organ bench (B) over the pedal board.
6.
Ensure that the voltage rating on the serial plate of the organ matches the
mains voltage in the building. Look for the serial plate (A).
7.
When a power cord plug is fitted with an earth pin: Make sure to connect to
a mains socket outlet with a protective earthing connection.
User Manual Studio 260 / 360 / P-360
Studio P-360
Shown model: Studio P-360
12