Paradyne ACCULINK 3150 Quick Reference page 7

Table 2. Network Interface Configuration Options (2 of 2)
Option
NET PLB: NET PLB:
BitStuff: BitStuff:
One (Framed
KeepAlive: KeepAlive:
(Loopback of
network signal)
Yellow: Yellow:
Circuit Ident: Circuit Ident:
CRC PThru CRC PThru
(Passthrough):
Table 3. General Configuration Options
Option
Tst Timeout: Tst Timeout:
Tst Duration: Tst Duration:
Table 4. User Interface Configuration Options (1 of 4)
Option
Self-Test: Self-Test:
Factory 1 Factory 2
Enab
N/A N/A
Disab
62411
N/A N/A
Part68
Disab
AIS AIS
One (Framed
All Ones) All Ones)
NetLp NetLp
(Loopback of
network signal)
Enab Enab
Disab Disab
Edit Edit
Clear Clear
Enab Enab
Disab Disab
Factory 1 Factory 2
Enab Enab
Disab Disab
10 10
Up Up
Down Down
Save Save
Factory 1 Factory 2
Enab Enab
Disab Disab
5
Comments/Description
Network-initiated PLB allows PLB to be Network-initiated PLB allows PLB to be
controlled by FDL PLB messages.
Enforces ONEs density protection per Enforces ONEs density protection per
AT&T TR 62411, ANSI T1 403, and AT&T TR 62411, ANSI T1-403, and
FCC Part 68 Technical Publication. FCC P t 68 T h i l P bli ti
Specifies the keep alive signal to send
to the network interface on a failure of to the network interface on a failure of
the DTE signal.
Transcodes and sends Yellow signal to
the network on receiving Yellow from the network on receiving Yellow from
DTE.
Specifies the transmission vendor s Specifies the transmission vendor's
circuit identifier.
Determines whether framing bits are Determines whether framing bits are
passed to the DTE.
Comments/Description
Specifies whether user-initiated
tests are limited by the Tst Duration tests are limited by the Tst Duration
configuration option.
Specifies in minutes the duration of Specifies in minutes the duration of
user-initiated tests.
Comments/Description
Allows bypass of self-test on Allows bypass of self-test on
initialization.
g