Paradyne ACCULINK 3150 Quick Reference page 11

Table 5. Alarm Configuration Options
Option
Alrm Msg: Alrm Msg:
SNMP Trap: SNMP Trap:
TrapDisc: TrapDisc:
DialOut: DialOut:
Call Retry: Call Retry:
Dial Delay:
AltDialDir:
Err Rate: Err Rate:
(Excessive Error Rate)
10E-5–10E-9
Factory 1 Factory 2
Disab Disab
Modem Modem
Com Com
Both Both
Enab Enab
Disab Disab
Enab Enab
Disab Disab
Enab Enab
Disab Disab
Enab Enab
Disab Disab
1–4 1–4
5 5
6–10 6–10
None None
1–5 1–5
10E–4 10E–4
10E-5–10E-9
9
Comments/Description
Does not display alarm messages.
Sends alarm messages to MODEM
port.
Sends alarm messages to COM port.
Sends alarm messages to both the
COM port and the MODEM port.
Sends SNMP traps. Sends SNMP traps
Specifies whether the modem p
connection will disconnect after a trap connection will disconnect after a trap
is sent.
Provides the option to allow automatic p
dial out to send alarm messages on dial-out to send alarm messages on
MODEM port.
Specifies whether an outgoing call is Specifies whether an outgoing call is
retried on a busy or failed call attempt.
The time (in minutes) to delay between
successive alarm dial-outs or retry
attempts.
The alternate dial-out directory to use if
a call to the primary number cannot be
completed.
The error rate threshold for Excessive
Error Rate Alarm. Error Rate Alarm