Table of Contents
Advertisement
Time base
Internal Trigger
External Trigger
Specifications and Characteristics
Characteristics
Maximum Sampling Rate
Real Time 4 GSa/s
Equivalent Time ^ 500 MSa/s
Record Length (per plug-in slot) ® 16 to 32,768 points in the A model
mainframes, and up to 64,536 points in the D model mainframes
Max Record Duration at Max Sample Rate
A model mainframes 8.192 |is
D model mainframes 32.768 |xs
EMS Jitter <6 ps ±0.005% of delay setting
Trigger Level Range ±1.5 full resolution screen diameters from center
screen
Input Resistance 50 0
Input Connector N-type (f) (Previous HP 54721A plug-ins with serial
prefix 3210A shipped with a BNC input connector.)
RMS Jitter <6 ps ±0.005% of delay setting
Tri^er Level Range ±1 V
Max Safe Input Voltage ±1.5 V
Probe Power Yes
1) Adjustable in 1 mV/div steps up to 1 V/div and 10 mV/div steps above 1 V/div
2) The probe attenuation factor is automatically set to 10:1 when the probe's power
cable is connected to the plug-in. The plug-in input coupling is automatically set to dc
and 50 Q.
3) Gharacteristics apply to full resolution cliarmel scales. Use the next lower
full-resolution sensitivity for intermediate channel scale settings.
4) These characteristics are valid after a Best Accuracy Cal and Probe Cal.
5) Multiple 600 MSa/s acquisitions are time-correlated into a single record with 1-ps
resolution, yielding an effective sampling rate of i terasample/second.
6) All data points that fall witldn the waveform display area's time window are plotted
to the screen.
Advertisement
Table of Contents
