6.
Re-insert the washer; ensure that the flanges' side and precast holes on
the side of the frame are in alignment.
7.
Fasten the turn knob to secure the rail in place.
8.
Repeat the same procedures to install the other rail.
Connecting the Control Box (Item# BP-BAR-CB)
Upon opening the control box, each motor connection port is color coded for
ease of identification.
1. DC Port
2. Back Motor (Green)
3. Foot Motor (Red)
4. Head Hi-Lo Motor (Yellow)
5. Foot Hi-Lo Motor (Yellow)
6. Hand Pendant
7. Battery Backup Port
16