Table of Contents
Advertisement
Installation Options
Installation on a Tabletop
IPD1-A2-ZZ40-20
The 12000E BLC is designed for installation in a Restricted Access area
where admittance is limited to trained and authorized service personel. It may
be installed on a tabletop or in a rack.
Insert the four provided rubber bumper screws into the mounting holes at the
bottom of the 12000E chassis for surface grip and airflow. Position and secure
all connecting cables such that they will not become a tripping hazard or pull
loose from the chassis. Ensure that the air supply vents around the top and
bottom edges of the chassis are not blocked.
12000E IP Broadband Loop Carrier Installation Instructions
Installation Options
5
Advertisement
Table of Contents
