Installing Your Interface Module(S) - Zhone 12000E Installation Instructions Manual

Installing Your Interface Module(s)

10
12000E IP Broadband Loop Carrier Installation Instructions
Interface modules provide the subscriber connections for an 12000E; up to
twelve interface modules may be installed in the 12000E (slots 1–12). There
are a variety of models available for purchase; contact your sales
representative for further information or visit www.zhone.com for a list of
available products. Any combination of interface module models may be
installed in an 12000E as long as they are supported by the model type and
version number of your management module; refer to the Release Notes for
your particular management module model for compatibility information.
1 Select a slot for installation. Although the 12000E is factory shipped with
Slot 1 open, interface modules may be installed in any slot, 1–12.
CAUTION:
If a slot cover is removed from slot 2–12, it must be replaced with an
interface module. DO NOT OPERATE YOUR 12000E WITH AN
EMPTY MODULE SLOT.
2 With the interface module PCB facing right and the interface module
model name upright, align the upper and lower edges of the PCB with the
slot module guides.
IPD1-A2-ZZ40-20