Optional optical drive
This is a service technician replaceable part only.
Removing the optical disk drive
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the air
shroud.
4.
Remove the drive backplane
5. Disconnect the power and signal cables from the optical disk drive (ODD) and observe the cable routing.
Steps
Press the blue latch to disengage the ODD from the system and slide out the ODD.
Figure 113. Removing the ODD
Next steps
Replace the
ODD.
Installing the optical disk drive
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the air
shroud.
4.
Remove the drive backplane
Safety
instructions.
Before working inside your
cover.
Safety
instructions.
Before working inside your
cover.
system.
system.
Installing and removing system components
115