Bosch ErgoMixx MFQ37 Series Information For Use page 16

en Avoiding material damage
▶ Never let the power cord come into contact with hot parts or be
dragged over sharp edges.
▶ Never place the appliance on or near hot surfaces.
▶ After switching off, wait until the drive has come to a complete
standstill.
▶ Keep hands, hair, clothing and utensils away from rotating parts.
▶ Never open the swivel arm during processing.
▶ Never leave the appliance switched on if the power supply is in-
terrupted. The appliance will automatically start up again follow-
ing the interruption in the power supply.
▶ Do not place the hand mixer on the appliance stand or take off
the stand until the drive has stopped and the mains plug has
been pulled out.
▶ Only attach and remove accessories once the drive has stopped
and the appliance has been unplugged.
▶ Never touch the edges of the blades with bare hands.
▶ Care should be taken when handling sharp blades, emptying the
container and during cleaning.
▶ Do not reach into the bowl or housing when lowering the swivel
arm.
▶ Be careful when processing hot food.
▶ Leave boiling food to cool down to at least 70 °C before pro-
cessing.
▶ Follow the cleaning instructions.
▶ Clean surfaces which come in contact with food before each
use.
damage material Avoiding
Avoiding material damage
damage material Avoiding ▶ Do not operate the appliance at no-load.
▶ Never use the blender jug in the mi-
crowave or oven.
Overview
Overview
Overview
→ Fig.
1
Slide for actuating the lock
1
Openings for the locking mechan-
2
ism
1
Depending on the model
2
separate operating instructions
16
Apertures (with lock) for inserting
3
the tools
Release buttons
4
Ejector button
5
Switch
6
Rear aperture with lock
7
Mixing bowl
8
Drive gear wheel
9
1
Depending on the model
2
separate operating instructions