Advertisement
HOW-TO:
VARIABEL NEUTRAL POSITION FOR FLIGHT CONDITION 'THERMAL'
1.
LS control the variable position. Check that LS is active:
Linkage - Function: CH 16 "CAMBER LS"
2.
To set the function, go to
Glider - Camber mixing
In flight condition = 'THERMAL'.
3.
GROUP = 'Sngl',
STATUS = ON
4.
With LS in the middle, neutral position is not changed. (Neutral position set by Trim Mix 1.)
Glider - Camber mixing: Curve
For Aileron and Flap and Elevator
Rate A and Rate B = +50
Offset = 0
5.
Glider - Camber mixing: Travel
AIL = AIL2 =
FLAP = FLAP2 =
ELE =
+10
Travel
Magnus Hedlund
+10
+10
(Only in 'THERMAL')
(Mix is on)
Set camber mixing end positions:
max travel up/down (Rate 1, 2)
max travel up/down (Rate 1, 2)
max elevator compensation (Rate 1, 2)
Speed (option)
Page 7
Advertisement
