Basic Vcr Operation; Recording - Zenith TVBR1322Z Operating Manual

Basic VCR Operation Playback/Record
Playing/One-time recording VHS videocassette tapes
Playing Tapes
1 After connections have been made and the channel search com-
pleted, press POWER to turn TV/VCR on.
2
Insert a VHS video cassette tape into the tape loading compart-
ment.
3
Press PLAY. (If the tape security tab has been removed, the tape
will begin to play automatically.) Press STOP to halt playback.
4
Press EJECT to unload tape.
Recording Tapes
1
Insert a tape into the tape loading compartment. Rewind or
advance the tape to the position you want the recording to
begin at. (You can only record on tapes which have the erasure
prevention tab intact. If the VHS cassette does not have the
erasure tab intact, eject the tape and paste a piece of clear
mylar tape over the security tab hole to be able to record on
the tape.)
Tune to the channel or the input source you want to record so
that its image appears on the screen. Press: REC/OTR to record
the image on the screen.
Press PAUSE to momentarily halt recording, press PAUSE again
to resume recording.
Press STOP to halt recording, press EJECT to remove tape when
finished.
Press EJECT to unload tape and POWER to turn TV/VCR off when
finished viewing.
You can press REC/OTR repeatedly to choose Instant Timer Recording.
Each press will increase recording time by 30 minutes up to a maximum
of 5 hours.
Additional recording options are available such as Timer recording; used
to record tapes while you are away. Recording speed and other options
are available, see the table of contents on page 7 for additional record-
.
ing options
Some features can only be accessed with the remote control.
206-3375
(One-Time Recording)
Erasure Tab
Removed
POWER
MENU
-
SET
ENTER
TV/MONITOR
CH
VOL
EJECT
CH
REW PLAY
Play
REC/OTR
STOP
Record
1
2
4
5
7
8
SPEED
Q. VIEW
0
CA
+
SET
CANCEL
CALL
VOL
MUTE
F.F
PAUSE/STILL
INPUT SEL.
3
TVCAP/TEXT
6
SLEEP
9
P A G E 1 9