Source Setup; Radio Setup; Setting The Tuner (Fm) Tone Quality (Tuner Condition); Setting The Tuner (Fm) Frequency Step - Alpine X409-WRA-JK Installation Manual

Source Setup

[Source] is selected on the Setup main screen in step 3. See "Setup
Operation" (page 28).
Source Setup Menu screen
<Setting items>
Radio
FM Tuner Setting
FM Frequency Step
1
SiriusXM*
Alert Setup
Alert
Alert Delete All
Favorite Team Setup
Parental Lock
Signal Indicator
2, 5
AUX*
3
AUX Name*
3
Signal*
4
HDMI*
Bluetooth Pandora
*1 This setting can be set when the SiriusXM source is being selected.
*2 This setting cannot be changed while the AUX source is being selected.
*3 This setting is only available when "AUX" is set to "On" (
*4 This setting cannot be changed while the HDMI source is being
selected.
*5 This setting cannot be set when the iDataLink module (sold separately)
is connected.
*6 This setting cannot be adjusted when an iPod/iPhone is connected or
Apple CarPlay/iPod/Pandora source is being selected.
The following steps 1 to 3 are common to each "Setting
item" of Source Setup. See each section for details.
1
Select the desired item.
2
To switch the setting, touch [ ], [ ], [ ], [ ], or mark the
checkboxes "Off" ( ) or "On" (
• If " " appears, there is a further hierarchy. Touch the desired
item.
3
Touch [ ] to return to the main source screen.
• To return to the previous List screen, touch [ ] in the previous
page. For details, see "About Basic Operation for List Screen"
(page 18).

Radio Setup

[Radio] is selected on the Source Setup Menu screen in step 1. See
"Source Setup" (page 41).
This unit can set your preferred tone quality for FM radio source.
Setting item:
Setting contents:
• Noise may be more noticeable when HiFi is set, depending on the
During manual tuning, you can select the frequency step for FM analog
radio station searching.
Setting item:
Setting contents:
).
).
Setting the TUNER (FM) Tone Quality (Tuner
Condition)
FM Tuner Setting
Normal (Initial setting) / HiFi / Stable
Normal: Standard setting
HiFi: High-quality setting
Stable: Control noise
reception status. In this case, the Normal setting is recommended.

Setting the TUNER (FM) Frequency Step

FM Frequency Step
200kHz (Initial setting) / 100kHz
41
-EN